Your payment information is processed securely.
A1: The TA1000 is designed for mixed 1-7S LiPo and LiHV fleets and provides two independent charging channels. Supported smart batteries can be recognized automatically, while standard packs can be configured manually for chemistry, cell count, current, and mode.
A2: Yes. The TA1000 runs two independent channels, each rated up to 25A and 500W, so compatible batteries with different settings can be charged on separate channels without using one shared profile.
A3: The TA1000 is the most portable charger in this collection at about 1.7 kg and 186 x 174 x 95 mm. The vehicle still needs a stable AC 100-240V, 50/60Hz supply that can support the intended charging load.
A4: The TA1000 supports 1-7S LiPo and LiHV packs, including supported smart batteries and conventional packs. Smart packs use automatic recognition; ordinary packs require the operator to enter the correct chemistry, cell count, current, and operating mode.
A5: The TA1000 provides up to 500W and 25A per channel, with 1000W combined. Daily throughput must be calculated from each battery's watt-hours and permitted charge rate, plus cooling and battery-swap time, rather than from the headline power alone.
A6: The TA1000 accepts AC 100-240V at 50/60Hz. For field use, choose a properly grounded generator or inverter with stable output and enough continuous capacity for the selected channel loads, and confirm its suitability before connecting the charger.
A7: With a supported smart pack connected through both the power and smart balance connections, the TA1000 reads battery type, cell count, and voltage and applies the supported charging profile. The listing describes an automatic start after a six-second countdown once communication is established.
A8: The TA1000 listing offers separate US and EU plug variants. Select the version that matches the destination's outlet and electrical standard, then confirm plug type, voltage, grounding, and circuit capacity in the final written quotation.
A9: Yes. The TA1000 specifications list storage charging up to 25A per channel and storage discharge up to 6A and 70W per channel. Use the battery manufacturer's storage-voltage guidance and allow adequate time because discharge is slower than high-power charging.
A10: The TA1000's channels operate independently and support 1-7S LiPo or LiHV batteries, so different supported packs can use separate profiles at the same time. Each battery still needs the correct power and balance connections and a charge rate within its own limits.
A11: On the TA1000, conventional batteries are connected to the XT90 power channel and balance port, then the operator selects chemistry, cell count, current, and mode on the display. Manual setup is straightforward for trained staff but must match the battery label exactly.
A12: The TA1000 can be used from an appropriately sized, stable AC source within 100-240V and 50/60Hz. Confirm generator waveform, grounding, continuous wattage, surge behavior, ventilation, and the battery manufacturer's charging limits before field deployment.
A13: The TA1000 listing states that its LCD can show individual cell voltages, internal resistance, and voltage differences during charging. Treat those readings as maintenance indicators and follow the battery maker's limits when deciding whether a pack remains serviceable.
A14: The TA1000 suits both settings because it combines independent channels, visible battery data, smart recognition, and manual controls in a 1.7 kg unit. Training should still cover chemistry selection, connector checks, ventilation, and safe handling before commercial use.
A15: The TA1000 page allows an appropriate adapter at the XT90 channel when needed, but an adapter does not prove electrical compatibility. Verify polarity, connector rating, cell count, chemistry, balance lead, and charge current before using any adapter cable.
A16: The TA1000 listing describes protection against over-temperature, over-current, overcharge, disconnection, and reverse polarity. These controls reduce risk but do not replace connector inspection, correct settings, ventilation, supervision, and the battery manufacturer's procedures.
A17: Yes. The TA1000 uses independent Channel A and Channel B controls, and the listed workflow allows an operator to stop a selected channel by holding its channel button. Follow the display prompts and disconnect only after the channel is safely stopped.
A18: The TA1000 specifications list a working range of 0-60°C and storage from -20-60°C. Battery limits may be narrower, so provide ventilation and pause charging whenever the charger or pack approaches its permitted temperature range.
A19: The TA1000 supports 1-7S LiPo and LiHV batteries and provides smart and manual workflows across two channels, making it useful for varied compatible research packs. It does not cover the 12-18S high-voltage range served by the larger chargers in this collection.
A20: For the TA1000, confirm the US or EU plug variant, destination voltage, included cables, selected package, current stock, shipping terms, and support arrangements in writing. The product page should not be treated as a universal package list for every country.
A21: Size a TA1000 fleet from battery watt-hours, allowed charge rate, two-channel capacity, daily sorties, cooling time, available power, and required reserve capacity. Run a timed trial with your actual packs before buying enough units for peak operations.
A22: No. The TA1000 automatically recognizes supported smart batteries, but ordinary or unsupported packs require manual verification and may not be compatible. Staff should quarantine damaged or unidentified batteries instead of relying on automatic detection.
A23: Choose the TA1000 when portability and 1-7S compatibility matter more than very high-voltage throughput. A larger charger is better suited to 12-18S packs, while actual turnaround should be compared using your battery capacities, permitted rates, site power, and daily schedule.
A24: For supported smart packs, the TA1000 reads battery type, cell count, and voltage and applies the supported charging profile automatically. It does not automate compatibility decisions for unknown packs, connector inspection, site power checks, or safe battery handling.
A25: For the TA1000, verify the ordered plug, both channel controls, display, power and balance ports, smart recognition with a supported pack, manual mode with a known test pack, storage mode, cooling, and the supplied documentation. Record results before customer handover.
Shipping times may vary depending on the destination and availability of the product.
If you receive a damaged or defective item, please contact us within 7 days of receipt. We will arrange for a replacement or refund, including free return shipping for defective items.
For more details, please review our Shipping Policy.
Tattu TA1000 G-Tech Smart Charger: In Stock & Ready for Global Express Delivery
Power up faster with theTattu TA1000 Dual Channel 1000W Smart Charger. We offerimmediate dispatchforin-stockunits viainternational express shippingto any destination worldwide. Every unit ships withfull certificationsand a100% genuine guaranteebacked by the official Tattu warranty.
For batteries equipped with G-Tech technology, the TA1000 offers a streamlined, automated charging experience. Begin by connecting the battery’s discharge lead to an available XT90 channel on the charger, utilizing an adapter if necessary to ensure a secure fit. Next, link the G-Tech balance connector to the corresponding balance port. A successful handshake is confirmed when the Tattu icon on the primary display illuminates in yellow. Once communication is established, the system bypasses the need for manual parameter entry and initiates the optimized charging cycle automatically after a 6-second countdown. To halt the process at any time, simply press and hold the specific channel button. Please note that both the power and balance connections must be fully engaged for the intelligent charging sequence to activate.
When charging conventional LiPo or LiHV packs, the TA1000 provides full manual control to ensure precision and safety. First, interface the battery's discharge plug with the charger's XT90 port (or use a compatible adapter cable) and connect the standard balance lead to the adjacent balance port. Unlike the smart series, these batteries require the operator to define the charging parameters manually. Use the navigation buttons to toggle through and select the correct battery chemistry, target current, and desired operational mode based on the manufacturer’s specifications. To begin the charging session, press and hold the CHA or CHB button. The operation can be paused at any moment by holding down the channel button. Ensuring both connectors are properly seated is essential, as the charger will not initiate power delivery if either connection is missing.
The Tattu G-Tech 16000mAh 6S series represents a specialized energy solution tailored for the rigorous demands of UAV flight academies and precision agricultural operations. Powered by Grepow’s proprietary smart cell technology, this high-capacity battery pack ensures consistent discharge stability and enhanced safety protocols essential for student pilot training and heavy-duty spraying missions.As a core component of the G-Tech Smart Ecosystem, the 16000mAh 6S battery goes beyond traditional power delivery. It offers an integrated intelligence layer that simplifies fleet management through automated health monitoring and optimized charging cycles. This smart integration significantly reduces operational risks and extends the hardware's service life, making it a cost-effective choice for educational institutions and commercial drone enterprises. To maintain peak system integrity, we advise operators to utilize G-Tech smart recognition to verify product authenticity and unlock the full suite of intelligent safety features.
The Tattu Plus is an intelligent battery specifically designed for UAVs, offering enhanced safety and performance. It features a protective casing for secure flights and an extended power lead for easier integration than standard Tattu batteries. LED indicators show charge status, while warning lights alert to abnormal temperatures, charging issues, or cell imbalances. After charging, it activates an intelligent storage mode, self-discharging to optimal voltage for prolonged life. Equipped with an advanced Battery Management System (BMS), Tattu Plus sets a new standard in drone battery technology.
Products you may like
Your Browsing History
